Parameters can be passed between forms using:
1) CALL_FORM
2) NEW_FORM
3) OPEN_FORM
Parameters can also be used to pass parameter to other Oracle products such as Oracle REPORTS
4) Run_Report_Object()
HOW
TO PASS PARAMETER WITH SINGLE QUOTE FROM FORMS TO REPORTS
And from
one form to another form using a
5) menu item
instead of a regular push button.
To do this you can use:
1)
The Default Parameter List
Each
form includes a built-in parameter List named Default. The Default parameter
List contains all of the form parameters that were defined in the form at
design time. For example, if you define parameters p1, p2, and p3 in Form A at
design time, they are automatically included in the Default parameter List for
Form A. The Default parameter List can be passed to a called form by including it in the argument List of the OPEN_FORM, CALL_FORM, or NEW_FORM built-in procedures.
DECLARE
the_List PARAMLIST:= Get_Parameter_List('default');
BEGIN
Open_Form('form_B',ACTIVATE, NO_SESSION,'default');
END;
the_List PARAMLIST:= Get_Parameter_List('default');
BEGIN
Open_Form('form_B',ACTIVATE, NO_SESSION,'default');
END;
To create a parameter follow the step
1) In the Object Navigator, select the Parameters node and choose
NAVIGATOR->CREATE.
2) Bring up the properties of the parameter and set the properties as needed.
For example, Set the datatype, default value, and name of the parameter.
3) To access the value of the parameter, add the reserved word PARAMETER
as a prefix to the parameter name. If you need to assign a value to
a parameter, use a regular assignment statement such as:
temp_var := :parameter.variab;
-- assigns the value of the parameter to test_var
:parameter.Variab := 'value';
-- assigns a value 'value' to the parameter
Whenever you create a regular parameter, it is actually added to a default
parameter list.
All parameters that you define in the Object Navigator belong to the default
parameter list. You can also pass the default parameter list to another
form if you need. For example:
WHEN-BUTTON-PRESSED
BEGIN
CALL_FORM('test', NO_HIDE, DO_REPLACE, NO_QUERY_ONLY, 'default');
END;
When passing the default parameter list as well as any other parameter list,
make sure that every parameter exists with the same name in the called
form.
2) Own parameter list
You can also create your own parameter list programmatically and pass it as an argument in a CALL_FORM or OPEN_FORM or Report
You
can use the following built-in subprograms to create and manipulate a parameter
List:ADD_PARAMETER
CREATE_PARAMETER_LIST
DELETE_PARAMETER
DESTROY_PARAMETER_LIST
GET_PARAMETER_ATTR
GET_PARAMETER_LIST
SET_PARAMETER_ATTR
Tip: Keep in mind the following when you create parameter Lists:
- CREATE_PARAMETER_LIST
is a function whose return value is the ID of the List being created. You
must assign the ID to a variable that you declared as type PARAMLIST (an
Oracle Forms data type).
- A call to
CREATE_PARAMETER_LIST creates a parameter List that does not yet contain
any parameters. To add parameters to the List, execute the ADD_PARAMETER
procedure.
- GET_PARAMETER_ATTR
and SET_PARAMETER_ATTR can be used to get and set the type and value of a
parameter that has been added to a parameter List with the ADD_PARAMETER
built-in. Do not use these built-ins to get or set the value of a form
parameter that was defined at design time; instead, refer to the parameter
using bind variable syntax or indirect reference.
- GET_PARAMETER_LIST
is a function that returns the ParamList ID of an indicated parameter
List, similar to the FIND-* functions available for other object types.
/*
** Declare a variable of type ParamList to store
** the parameter List ID
*/
DECLARE
List_id ParamList;
BEGIN
/*
** Create a parameter List named "input_params"
*/
List_id := Create_Parameter_List('input_params');
/*
** Add two parameters to the List to pass values for each
One way to use a parameter list is to pass the value of a text item
that is used as a search criterion when calling another form.
Another example is to pass a value to a report parameter that is used in
the WHERE clause to retrieve only certain rows.
Suppose you need to pass the department number from one form (department) to another form (employee);
you use the department number to query all employees working in that
department in the employee form.
You can execute the following code from
a When-Button-Pressed trigger or even from a menu item:
DECLARE
List_id ParamList;
BEGIN
List_id:= GET_PARAMETER_LIST('input_params');
IF NOT ID_NULL(param_list_id) THEN
DESTROY_PARAMETER_LIST(list_id);
END IF;
List_id := Create_Parameter_List('input_params');
ADD_PARAMETER(list_id, 'emp_query', TEXT_PARAMETER, :deptno);
CALL_FORM('employee', NO_HIDE, DO_REPLACE, NO_QUERY_ONLY, list_id);
END;
1) You must declare an object of type ParamList
2) Use the GET_PARAMETER_LIST built-in to find out if the parameter already exists. If it exists, destroy it and recreate it. You can use the DESTROY_PARAMETER_LIST built-in to delete a parameter list.
3) You can then add one or more parameters to the parameter list.
The ADD_PARAMETER requires the following arguments:
-- The parameter list id, or parameter name
-- The name of the parameter being created
-- The parameter type
-- The parameter value
In the example above, 'emp_query' is the name of the parameter, TEXT_PARAMETER is
the parameter type, and :deptno is the value of the parameter. : emp_query gets
the value from a text item called deptno. Most of the parameters that you add
are of the type TEXT_PARAMETER, unless you try to pass a record group.
Record group parameters must be defined as DATA_PARAMETER instead of
TEXT_PARAMETER.
To access the value of a parameter in a called form, you must create the
following triggers in the employee form:
1) WHEN-NEW-FORM-INSTANCE at the form level
2) PRE-QUERY trigger at the block level
Or
3) in a WHEN-NEW-FORM-INSTANCE at the form level
a. Default_where
b. one_time_where
In addition, create a parameter with the same name as the parameter
that you are passing in the parameter list :emp_query.
The application returns an error message that the parameter does not exist.
The following is an example of two triggers needed to do a query based on the
value passed in the parameter list when the form 'employee' is called:
WHEN-NEW-FORM-INSTANCE in called form at the form level
BEGIN
EXECUTE_QUERY;
END;
PRE-QUERY in called form at the block level
/* If this is a called form, then, set up the search criteria based /*
/* on the parameter emp_query passed in the parameter list */
BEGIN
:deptno := :parameter.emp_query;
END;
WHEN-NEW-FORM-INSTANCE
with Default_where (or one_time_where) in called form at the form level
BEGIN
IF :PARAMETER. EMP_QUERY is null THEN
Enter_query;
ELSE
Set_Block_Property('EMP',DEFAULT_WHERE,
‘ DEPTNO = '||:PARAMETER.EMP_QUERY); ' AND ANNO = '||:PARAMETER.ANNO);
execute_query;
end if;
END;
-----
How to pass parameters
from one form to another form
using a menu item
instead of a regular push button.
TO PASS PARAMETERS FROM FORM1 TO FORM2 USING THE MENU ITEM
1) Create form1 e.g. based on xxx table.
We will pass REG_QUERY as the parameter from form1 to form2.
2) Create form2 with a button.
1) Create a parameter under the object navigator of form2.
Let us name that parameter "param1" and make the datatype
"Char" in order to match
REG_QUERY datatype.
4) Create a menu using
menudefs.mmb and name it e.g. mymenu
5) Create a menu item and name it
"callform2".
6) Under the property of the menu
item "callform2", bring the pl/sql editor
by clicking on the "Menu
Item Code". Type the following
code:
DECLARE
param_list_id ParamList;
REG_QUERY VARCHAR2(50) := 'Miller';
BEGIN
IF REG_QUERY IS NOT NULL THEN
param_list_id :=
GET_PARAMETER_LIST('TDOCUMENTO');
IF NOT
ID_NULL(param_list_id) THEN
DESTROY_PARAMETER_LIST('TDOCUMENTO');
END
IF;
param_list_id := CREATE_PARAMETER_LIST('TDOCUMENTO');
ADD_PARAMETER(param_list_id,
'REG_QUERY', TEXT_PARAMETER, REG_QUERY;
CALL_FORM
(‘form2’,HIDE,DO_REPLACE,NO_QUERY_ONLY,SHARE_LIBRARY_DATA,param_list_id);
DESTROY_PARAMETER_LIST(param_list_id);
END IF;
END;
7) Save the menu and compile it
to create the mmx.
8) Open the properties of the
form level of form1 in order to assign the menu.
Under "Menu Module",
type your menu that you have just modified "mymenu".
9) Under form2, create
WHEN-NEW-FORM-INSTANCE trigger with the following code:
BEGIN
MESSAGE(REG_QUERY);
MESSAGE(‘’);
END;
10) Save form2 and compile it to create the fmx.
11) Go back to your form1 and run it
For instance, we would like to
pass "Miller" as our parameter .
REG_QUERY from
form1 to form2.
12) Go to the menu item "callform2" in form1 and click on that
menu item in
order to pass REG_QUERY
parameter e.g. "Miller".
When you get form2, that will
display the parameter
that was passed from form1.
3) To Call Reports with a Parameter Form
How to Access the Value of a Parameter in a report (run_report_object() )
DECLARE
id_pl ParamList := NULL;
v_repid REPORT_OBJECT;
param_list_name VARCHAR2(30) := 'para_lista';
v_rep
VARCHAR2(100);
NREPORT VARCHAR2(30)
:= ‘myreport’;
MYWHERE VARCHAR2(300)
:= ‘’;
INTESTA_RP VARCHAR2(300)
:= ‘’;
BEGIN
v_repid :=
find_report_object(NREPORT );
Id_pl :=
GET_PARAMETER_LIST(param_list_name);
IF NOT ID_NULL(Id_pl) THEN
DESTROY_PARAMETER_LIST(Id_pl);
END IF;
id_PL :=
CREATE_PARAMETER_LIST(param_list_name);
--
ADD_PARAMETER(ID_PL, 'PARAMFORM', TEXT_PARAMETER, 'NO');
ADD_PARAMETER(ID_PL, 'MYWHERE', TEXT_PARAMETER,
MYWHERE);
ADD_PARAMETER(ID_PL, 'INTESTA_RP', TEXT_PARAMETER, INTESTA_RP);
V_REP :=
run_report_object(v_repid,id_PL);
In addition, create a parameters with the same name as the parameter
that you are passing in the parameter list: MYWHERE and INTESTA_RP.
In Report builder
Name: MYWHERE
Datatype: CHAR
Width: 300
Initial value: AND DEPTNO = ‘10’ (It can be any valid value)
Same for user parameter INTESTA_RP
HOW
TO PASS PARAMETER WITH SINGLE QUOTE FROM FORMS TO REPORTS
How do you pass a parameter that contains single quotes
from Oracle Forms to Oracle Reports?
Example
-------
How do you store the parameter 'test', not test, in the database?
Hence, in order for the report to work, the parameter must appear
in the Parameter Form as 'test'.
Use sets of 3 single quotes around the string literal.
Example
-------
'''test'''
This appears as 'test' in the Parameter Form.
----
ORA-907
or ORA-12802 when using quote in the parameter
A report has to be used in web application. It has a parameter that
includes
quote signs like this : 'value1','value2',...,'valueN'
Following problems occurred running it as web application :
1. when using single quotes for the list of initial values:
-> ora-907
2. when using no quotes at all for the list of initial values:
-> ORA-12801 & ORA-1462
3. when using double quotes for each value in the list of initial
values:
-> no initial values given
in Parameterform
4. The only way to get it working in web reports only:
add double quotes in front and
at the end of the parameter list
Other one possible workaround is to use following trigger :
Reports Trigger
After Parameter Form)
function AfterPForm return boolean is
begin
:my_empname:=chr(39)||:my_param||chr(39);
return (TRUE);
end;
By implementing the code in the
afterParameterForms trigger
": my_param:=chr(39)||:my_empname||chr(39);" adds quotes
and which becomes finally double
quotes
Another
In a Form which will call a report with some
parameters. You find that if the text parameter contains "'", You
will get the following errors in the log of reports background engine.
REP-0159 : Syntax error on command line
Error Submitting report
You can't use that as it's an illegal character.
What you do is put a little code in so as to change all apostrophes into their MIME equivalent. This must also be done for the percent sign (%) and others which might be considered illegal in an URL. The percent sign is the escape character in MIME so putting it in an URL results in whatever else is after it to be considered an escape character in HEX which causes problems.
In short, replace all ' in your URL sent to the Report Server with %27. If you're wondering, the escape code for the percent sign is %25.
In the future, any other illegal characters, just replace the character with %hex where hex is the hex code for the ASCII character.
--
HOW TO EMBED SINGLE QUOTE IN STRING
REP-0159 : Syntax error on command line
Error Submitting report
You can't use that as it's an illegal character.
What you do is put a little code in so as to change all apostrophes into their MIME equivalent. This must also be done for the percent sign (%) and others which might be considered illegal in an URL. The percent sign is the escape character in MIME so putting it in an URL results in whatever else is after it to be considered an escape character in HEX which causes problems.
In short, replace all ' in your URL sent to the Report Server with %27. If you're wondering, the escape code for the percent sign is %25.
In the future, any other illegal characters, just replace the character with %hex where hex is the hex code for the ASCII character.
--
HOW TO EMBED SINGLE QUOTE IN STRING
How do you embed single quotes ( ' ) into a character string?
How do you concatenate a quote in SQL?
How do you place quotes around a character string in a SQL query?
How do you store an apostrophe into a character variable in PL/SQL?
Example 1
When you issue either of the following SELECT statements:
SQL> SELECT ' FROM
dual;
SQL> SELECT '''
FROM dual;
the following error occurs:
ORA-01756: quoted string not
properly terminated
Example 2
When you issue the following SELECT statement:
SQL> SELECT
''character string in quotes'' FROM dual;
the following error occurs:
ORA-00923: FROM keyword not found
where expected
Solution
Description:
To create a single quote, concatenate CHR(39) to the string.
CONCATENATE CHR(39) TO CREATE
LITERAL SINGLE QUOTE
Example 1
---------
SQL> SELECT 'test'
|| CHR(39) || 'case' result FROM
dual;
RESULT
---------
test'case
Example 2
---------
SQL> SELECT CHR(39)
c FROM dual;
C
-
'
To return the ASCII
value of the single quote ( ' ):
SQL> SELECT
ASCII('''') FROM dual;
ASCII('''')
-----------
39
USE 2 SINGLE QUOTES TO CREATE 1 SINGLE QUOTE
Keep the following two rules in mind:
1. Enclose every character string
in single quotes.
The single quote is a string
delimiter.
2. Inside a string literal, use
two consecutive single quotes
to create a literal single
quote.
Example 1
---------
6 single quotes: SELECT
'test' || '''''' || 'case' c
FROM dual;
RESULT
test''case
8 single quotes: SELECT
'test' || '''''''' || 'case'
c FROM dual;
RESULT
test'''case
You can also implement the above in the following way:
SELECT 'test''case' c FROM dual;
RESULT
test'case
SELECT 'test''''case' c FROM dual;
RESULT
test''case
Hence:
a. To create a single quote,
concatenate 4 single quotes: ''''
The two single quotes in the
middle define the single quote.
The outside single quotes are
the single quotes that must
surround a string.
Example 2
---------
SQL> SELECT '''' FROM dual;
'
-
'
Example 3
---------
SQL> SELECT 'test' || '''' || 'case'
result FROM dual;
RESULT
---------
test'case
b. To place single quotes around
a character string,
enclose the character string
within 3 single quotes: '''
At the start of a character string:
the first single quote defines
the start of the character string;
it is one of the two single
quotes that surround the string.
The second and third single
quotes define the literal single quote.
At the end of the character string:
the first and second single
quotes define the literal single quote.
The third single quote closes
the character string; it is the
other single quote that
surrounds the string.
Example 4
---------
SQL> SELECT '''character string in quotes''' result FROM dual;
RESULT
'character string in quotes'
More examples:
Example 5
---------
SRW.DO_SQL('SELECT
DECODE(dname, ''NONE'', NULL, ''A'')
FROM dept
WHERE deptno = 10');
As a result, this is
the SELECT statement sent to the database:
SELECT DECODE(dname, 'NONE', NULL, 'A')
FROM dept
WHERE deptno = 10
Example 6
---------
DECLARE
a
VARCHAR2(200);
q CHAR(1) :=
'''';
BEGIN
a := '''this is a ' || q || 'quoted'' string'
|| q;
END;
String "a" stores:
'this is a 'quoted' string'
Built-in used (From Oracle Forms ONLine help)
PROCEDURE
CALL_FORM
(formmodule_name VARCHAR2,
display NUMBER,
switch_menu NUMBER,
query_mode NUMBER,
data_mode NUMBER,
paramlist_name VARCHAR2);
(formmodule_name VARCHAR2,
display NUMBER,
switch_menu NUMBER,
query_mode NUMBER,
data_mode NUMBER,
paramlist_name VARCHAR2);
Parameters
formmodule_name
The name of the
called form (must be enclosed in single quotes). Datatype is VARCHAR2.
display
HIDE (The default.) Oracle
Forms will hide the calling form before drawing the called form.
NO_HIDE Oracle Forms will display the called form without hiding the calling form.
NO_HIDE Oracle Forms will display the called form without hiding the calling form.
switch_menu
NO_REPLACE (The default.) Oracle Forms will keep the default menu module of the
calling form active for the called form.
DO_REPLACE Oracle Forms will
replace the default menu module of the calling form with the default menu
module of the called form.
query_mode
NO_QUERY_ONLY (The
default.) Oracle Forms will run the indicated form in normal mode, allowing the
end user to perform inserts, updates, and deletes from within the called form.
QUERY_ONLY Oracle Forms will run the indicated form in query-only mode, allowing
the end user to query, but not to insert, update, or delete records.
data_mode
NO_SHARE_LIBRARY_DATA (The default.) At runtime, Oracle Forms will not share data between
forms that have identical libraries attached (at design time).
SHARE_LIBRARY_DATA At runtime, Oracle Forms will share data between forms that have identical libraries attached (at design time).
SHARE_LIBRARY_DATA At runtime, Oracle Forms will share data between forms that have identical libraries attached (at design time).
paramlist_id
The unique ID
Oracle Forms assigns when it creates the parameter list. You can optionally
include a parameter list as initial input to the called form. Datatype is
PARAMLIST.
paramlist_name
The name you gave
the parameter list object when you defined it. Datatype is VARCHAR2.
PROCEDURE
OPEN_FORM
(formmodule_name VARCHAR2,
activate_mode NUMBER,
session_mode NUMBER,
data_mode NUMBER,
paramlist_id PARAMLIST);
(formmodule_name VARCHAR2,
activate_mode NUMBER,
session_mode NUMBER,
data_mode NUMBER,
paramlist_id PARAMLIST);
Parameters:
formmodule_name
The name of the
form to open. Datatype is VARCHAR2. Required
activate_mode
ACTIVATE (The default.) Sets focus to the form to make it the active form in the
application.
NO_ACTIVATE Opens the form but does not set focus to the form. The current form remains current.
NO_ACTIVATE Opens the form but does not set focus to the form. The current form remains current.
session_mode
NO_SESSION (The default.) Specifies that the opened form should share the same
database session as the current form. POST and COMMIT operations in any form
will cause posting, validation, and commit processing to occur for all forms
running in the same session.
SESSION Specifies that a new, separate database session should be created for the opened form.
SESSION Specifies that a new, separate database session should be created for the opened form.
data_mode
NO_SHARE_LIBRARY_DATA (The default.) At runtime, Oracle Forms will not share data between
forms that have identical libraries attached (at design time).
SHARE_LIBRARY_DATA At runtime, Oracle Forms will share data between forms that have identical libraries attached (at design time).
SHARE_LIBRARY_DATA At runtime, Oracle Forms will share data between forms that have identical libraries attached (at design time).
paramlist_name
The name of a
parameter list to be passed to the opened form. Datatype is VARCHAR2.
paramlist_id
The
unique ID that Oracle Forms assigns to the parameter list at the time it is
created. Use the GET_PARAMETER_LIST function to return the ID to a variable of
type PARAMLIST.
PROCEDURE
NEW_FORM
(formmodule_name VARCHAR2,
rollback_mode NUMBER,
query_mode NUMBER,
data_mode NUMBER,
paramlist_name VARCHAR2);
(formmodule_name VARCHAR2,
rollback_mode NUMBER,
query_mode NUMBER,
data_mode NUMBER,
paramlist_name VARCHAR2);
Parameters
formmodule_name
Then name of
the called form (must be enclosed in single quotes). Datatype is VARCHAR2.
rollback_mode
TO_SAVEPOINT (The default.) Oracle Forms will roll back all uncommitted
changes (including posted changes) to the current form's savepoint.
NO_ROLLBACK Oracle Forms will exit the current form without rolling back to a savepoint. You can leave the top level form without performing a rollback, which means that you retain any locks across a NEW_FORM operation. These locks can also occur when invoking Oracle Forms from an external 3GL program. The locks are still in effect when you regain control from Oracle Forms.
FULL_ROLLBACK Oracle Forms rolls back all uncommitted changes (including posted changes) that were made during the current Runform session. You cannot specify a FULL_ROLLBACK from a form that is running in post-only mode. (Post-only mode can occur when your form issues a call to another form while unposted records exist in the calling form. To avoid losing the locks issued by the calling form, Oracle Forms prevents any commit processing in the called form.)
NO_ROLLBACK Oracle Forms will exit the current form without rolling back to a savepoint. You can leave the top level form without performing a rollback, which means that you retain any locks across a NEW_FORM operation. These locks can also occur when invoking Oracle Forms from an external 3GL program. The locks are still in effect when you regain control from Oracle Forms.
FULL_ROLLBACK Oracle Forms rolls back all uncommitted changes (including posted changes) that were made during the current Runform session. You cannot specify a FULL_ROLLBACK from a form that is running in post-only mode. (Post-only mode can occur when your form issues a call to another form while unposted records exist in the calling form. To avoid losing the locks issued by the calling form, Oracle Forms prevents any commit processing in the called form.)
query_mode
NO_QUERY_ONLY (The default.) Runs the indicated form normally, allowing the end user
to perform inserts, updates, and deletes in the form.
QUERY_ONLY Runs the indicated form in query-only mode; end users can query records, but cannot perform inserts, updates or deletes.
QUERY_ONLY Runs the indicated form in query-only mode; end users can query records, but cannot perform inserts, updates or deletes.
data_mode
NO_SHARE_LIBRARY_DATA (The default.) At runtime, Oracle Forms will not share data between
forms that have identical libraries attached (at design time).
SHARE_LIBRARY_DATA At runtime, Oracle Forms will share data between forms that have identical libraries attached (at design time).
SHARE_LIBRARY_DATA At runtime, Oracle Forms will share data between forms that have identical libraries attached (at design time).
paramlist_id
The unique ID
Oracle Forms assigns when it creates the parameter list. Specify a parameter
list when you want to pass parameters from the calling form to the new form.
Datatype is PARAMLIST. A parameter list passed to a form via NEW_FORM cannot
contain parameters of type DATA_PARAMETER (a pointer to record group).
paramlist_name
The name you
gave the parameter list object when you defined it. Datatype is VARCHAR2. A
parameter list passed to a form via NEW_FORM cannot contain parameters of type
DATA_PARAMETER (a pointer to record group).
FUNCTION
RUN_REPORT_OBJECT
(report_name VARCHAR2,
paramlist_id PARAMLIST);
Returns VARCHAR2(report_name VARCHAR2,
paramlist_id PARAMLIST);
Parameters
report_id
Specifies
the unique ID of the report to be run. You can get the report ID for a
particular report using the Built-in FIND_REPORT_OBJECT
The name of the
report object to run.
paramlist_name
The name
you gave the parameter list object when you defined it. Datatype is VARCHAR2.
paramlist_id
The
unique ID Oracle Forms assigns when it creates the parameter list. Datatype is PARAMLIST.
No comments:
Post a Comment